11
OWNER’S MANUAL
AV quattro
/
SPK IN
(1.2 - 20V)
AV quattro
L
- + - +
R
CH A
L
- + - +
R
CH B
ART
PREOUT
IN B
IN B
(IN A)
IN A
L
L
R
ON
OFF
OFF
ON
R
MONO INPUT
1.
IN A:
Channel
A
left and right analog inputs. Set the
IN B
switch to
OFF
, through this input you can drive channel
B
left and right inputs.
2.
IN B:
Analog inputs for channel
B
left and right. Set the
IN B
switch to
ON.
3.
PREOUT:
This jack provides A channel Left and Right preamplified outputs to drive a separate amplifier (typical
with subwoofer). These signals are full range, without crossover action.
4.
SPK IN CH A:
Channel A high-level left and right analog inputs.
5.
SPK IN CH B:
Channel B high-level left and right analog inputs.
6.
ART (ON-OFF):
If the source does not feature a 12V DC REMOTE OUT, set the
ART
switch to
ON
to turn on the
amplifier plugging the cables to the
SPK IN
signal inputs.
If the source features a 12V DC REMOTE OUT, set the
ART
switch to
OFF
.
7.
IN B (ON-OFF):
Select
OFF
to drive B channels with
A
input signals. Whit this setup, do not connect B inputs.
If the source features a REAR output, select
ON
and connect its signals to
B
inputs (B PRE-IN or B HI-IN).
7. FRONT PANEL
2
1
6
5
4
3
7
7