Audison Prima AP5.9 bit User Manual Download Page 3

USER’S MANUAL

3

AP5.9 bit /

1. Product descriPtion / Precautions

2. PacKaGe contents

 

The 

AP5.9 bit

 is a 5-channel amplifier with a 32-bit, 147-MHz digital signal processor (DSP) and 24-bit Analog-Digital 

  and Digital-Analog converters, essential to optimize the acoustic performance of your Car Audio entertainment 

  system. It connects to any standard system, even in vehicles with an integrated audio processor, since the 

AP5.9 bit

 

  sends back a linear signal via a de-equalization function. 

  It comes with 7 signal inputs including 6 Hi-Level and 1 S/PDIF optical digital inputs and provides 5 amplified 

  outputs and 4 relays for analog amplifiers to give a 9-channel amplified system. 

  Each output channel features a graphically adjustable parametric equalizer group, a 68-frequency electronic 

  crossover as well as BUTTERWORTH or LINKWITZ filters with 6-24 dB slopes and a digital time delay line. 

  The user can adjust the AP5.9 bit settings through the DRC remote control device.

WarninG:

 

1.

 a PC provided with Windows XP, Windows Vista, Windows 7 or Windows 8 operating system, 1.5 GHz minimum 

    

    processor speed, 1 GB RAM minimum memory and a 1024 x 600 pixels minimum resolution graphics card as 

    

    well as at least 512 MB of available hard-disk space are required to install the software and setup the product. 

  

 

 2.

 Before connecting the product, carefully read this manual. Improper connections may cause damage

  

 

  to 

AP5.9 bit

 or to the speakers in your car audio system.

1/2

-

  Multipolar cable, Inputs/Rem:

-

  Multipolar cable, Speakers out:

-

  NR. 1 - 30A replacement fuse:

-

  1.8 m USB cable:

-

  2.5 mm hex key:

-

  NR. 4 - 4.2 x 50 mm self-tapping, cross head mounting screws:

-

 

AP5.9 bit amplifier

-

 Warranty

-

  Quick start guide

-

  CD ROM containing:

 

AP5.9 bit

 

Software

  This owner’s manual (.pdf)

  Audio Test Tracks

QUICK

START

GUIDE

AP5.9

30

 A

CD 1.0A

5

-

  Multipolar cable, DSP out:

Summary of Contents for Prima AP5.9 bit




























































Reviews: