Audison LRX6SR, User Manual

Page: 10 / 20

SETTING PANEL
30
It permits to reach the resistors to set subsonic filter cut-off frequency, the switch which activates
subsonic filter (
SUBSONIC ) and to insert VCA modules for the subwoofer volume remote control.
SUBSONIC FILTER ACTIVATION
Subsonic filter is activated through SUBSONIC switch under the setting panel.
• SUBSONIC switch permits to eliminate subsonic frequencies;
these sounds cannot be heard by human ears but cause useless
and damaging stress to amplifier and speakers. When it is on ON,
frequencies below the chosen cut-off one are eliminated.
Subsonic filter cut-off frequency can be adjusted through 4 Hz
steps; this occurs by replacing the special resistors located into a
socket which can be reached through the setting panel in the
amplifier bottom. The amplifier is given with
20 Hz cut-off
frequency.
2 - Once operations have
been carried out, please
close the setting panel.
1 - Remove the setting panel in the
amplifier bottom in order to carry out
operations.
FUNCTIONS
Setting panel
Man. LRx 6.SR in 4 Lingue 10-02-2004 16:56 Pagina 30