1
ON-OFF POWER BUTTON (
)
Press this button to turn the unit on or off. The
unit will also turn on automatically when a com-
pact disc is inserted if the ignition switch is
“on”.
2
VOLUME (LEVEL) CONTROL
To increase the volume level, turn the knob
clockwise. The volume will increase and the
level will be shown on the display panel from
a minimum of VOL 00 to a maximum of VOL
39. To decrease the volume level, turn the
knob counter-clockwise. The display will au-
tomatically return to the normal indication 5
seconds after the last volume adjustment or
when another function is activated. This con-
trol is also used in conjunction with the Push
Select Control button
3
to adjust the bass,
treble, balance and fader levels as described
in
4
,
5
,
6
and
7
.
3
PUSH SELECT CONTROL BUTTON
This button, which is integral to the VOLUME
CONTROL, is used to select the audio
function (volume, bass, treble, balance, or
fade) whose setting is adjusted using the
VOLUME CONTROL
2
. Pressing the Push
Select control button once will set the unit
for bass adjustment (BAS will appear on the
display panel) and an audible beep will occur.
Pressing the button additional times will
select treble adjustment (TRE on the
display), balance (BAL), or fader (FAD),
each accompanied by a beep tone. The
display will automatically return to the
normal indication 5 seconds after the last
adjustment or when another function is
activated.
4
BASS CONTROL
To adjust the bass level, first select the Bass
mode by pressing the Select button
3
so
the BAS indication appears on the display
panel. Within 5 seconds of choosing the
Bass mode, turn the Level control
2
counter-clockwise to decrease the bass
5
5
5
5
5
OPEROPEROPEROPEROPER
AAAAA
TTTTT
ING INSTRUCING INSTRUCING INSTRUCING INSTRUCING INSTRUC
TTTTT
IONSIONSIONSIONSIONS
