background image

Page 7

REMOTE PANIC OPERATION
The Lock or Unlock button on your keychain transmitter also functions as a panic switch for
use in emergency situations. To use remote panic:

1. Press and hold the Lock or Unlock button on the keychain transmitter for 3 or more seconds.

The alarm will immediately sound.

2. To stop the alarm, press and hold the Lock or Unlcok button on the transmitter again for 3

seconds. If the button is not pressed, the alarm will automatically stop after 30 seconds.  Also
if any transmitter button other than the Lock or Unlock button is pressed and released, the
Panic mode will be turned off immediately. The normal function of this transmitter button will
be suspended during the Panic sounding period.

NOTE: While in the Panic mode, pressing and releasing the Lock, or the Unlock buttons will,  if

the option is installed, lock and unlock the doors respectively.  While in the panic mode,
anytime the unlock button is pressed, the the panic feature will continue for the alloted
30 seconds, however, the security system will be disarmed allowing the vehicle to start.

OPTIONAL DEVICE OUTPUT (CHANNEL 3)
Controlled By:  

o

 Option Button, 

o

 Both Lock & Unlock Button, 

o

 Both Option & Lock Button,

or

o

 Both Option and Unlock Button.

This security system is equipped with an output which will activate when the appropriate trans-
mitter button is depressed for 4 seconds. Optional devices that may be connected to this
channel are:

o

 Remote Electric Trunk Release

o

 Remote Car Starter

o

 Remote Window Closure

o

 Remote Garage Door Interface

NOTE: In addition there may be a second optional feature connected to your system that when

the same transmitter button is pressed and released two times within three seconds
(double pressed), the second optional feature will activate. This output is typically
used for a remote start option and will likely prevent inadvertent activation of the
remote start device if young children are playing with the hand held transmitter.

If your vehicle is not equipped with an electronic trunk release switch, or other option listed, this
feature may have been connected to another accessory. Please ask your dealer for further
information.

ADDITIONAL REMOTE FUNCTION (CHANNEL 4)
Controlled By:  

o

 Option Button, 

o

 Both Lock & Unlock Button, 

o

 Both Option & Lock Button,

or

o

 Both Option and Unlock Button.

This security system has an additional feature that can be connected to a number of different
optional accessories. Some of the more common uses for this channel are:

o

 Remote Car Starter

o

 Remote Window Closure

o

 Remote Garage Door Interface

To remotely operate the device indicated, momentarily press, or press and hold the
appropriate transmitter button(s) as indicated above.

ADDITIONAL REMOTE FUNCTION (CHANNEL 5)
Controlled By:  

o

 Option Button, 

o

 Both Lock & Unlock Button, 

o

 Both Option & Lock Button,

or 

o

 Both Option and Unlock Button.

This security system has an additional feature that can be connected to a number of different
optional accessories. Some of the more common uses for this channel are;

o

 Remote Car Starter

o

 Remote Window Closure

o

 Remote Garage Door Interface

To remotely operate the device indicated, momentarily press, or press and hold the
appropriate transmitter button(s) as indicated above.

Summary of Contents for Pursuit PRO 9649









Reviews: