CHANNEL 2 OUTPUT:
The system has an additional output that can be wired to a number of different
optional accessories. Some examples of these optional accessories are;
– Remote Trunk Release
– Remote Car Starter
– Remote Window Roll Up
To activate the optional accessory;
1. Press and hold the "Option" button on the keychain transmitter for
approximately 3 seconds.
2. The optional accessory that has been connected to channel 2 will now
engage.
AUTO LOCK & UNLOCK:
The system can be programmed for automatic lock when the ignition switch
is turned on and for automatic unlock when the ignition switch is turned off.
When this feature is activated, approximately 3 seconds after turning the
ignition key to the on position, all doors will lock only if all doors are closed.
When the key is turned to the off position, all doors will immediately unlock.
VALET SYSTEM OVERRIDE SWITCH:
The "valet" switch allows you to temporarily by-pass the starter interrupt
feature, eliminating the need to hand your keychain transmitter to parking
attendantsorgaragemechanics. Whenthesystemisinvaletmode,all features
except the starter interrupt will remain operational. To use the valet mode;
1. Enter the vehicle, and turn the ignition key to the on position.
2. Move the valet toggle switch to the on position.
3. To return to normal operation, move the valet switch to the off position any
time the ignition key is on.
In the event that you lose your transmitter, or if the transmitter fails to operate
when you return to the vehicle, the valet switch can be used as a system
override switch. Turn the ignition key on, and move the valet switch to the on
position. The vehicle can now be started.
NOTE: Always remember to move the valet switch back to the off
position. This will ensure that the vehicle remains protected at all
times.
3
