REMOTE DOOR LOCKING:
1. Turn off the engine, exit the vehicle, and close all doors.
2. Press and release the Lock/Unlock button on the keychain transmitter.
The vehicle's doors will lock.
3. The vehicle's starter is now interrupted, and the car cannot be started, even
when using the ignition key.
BACK UP PASSIVE OPERATION:
The system can be programmed to operate automatically when you leave the
car. This programming must be done by the installer during the installation.
The Passive feature works as follows;
1. Turn off the engine, exit the vehicle, and close all doors.
2. In 30 seconds, the vehicle's starter will automatically be interrupted. If the
passive lock feature was selected on at time of installation, then the doors
will lock automatically in 30 seconds.
OPTION NOTE: The system can be programmed to either...
Automatically lock the doors, or only lock the doors when the transmitter is
operated. Check with your installation center for programming of this feature.
REMOTEDOORUNLOCKING:
1. As you approach the vehicle, press and release Lock/Unlock button on the
keychain transmitter.
2. The vehicle's doors will unlock, and the starter interrupt system is
disengaged allowing you to start the vehicle.
3. Never attempt to unlock the doors from a distance that will prevent you
from starting the vehicle within 30 seconds if the system has been
programmed for passive operation. If you do this, and the vehicle will not
start, simply press and release the lock/unlock button again.
OPTION NOTE: If the optional interior illumination relay has been
installed in your vehicle, then the dome light will turn on for 30 seconds
during step 1 above. If you turn the ignition switch on during the 30
second timer, then the dome light will turn off.
2
