YOUR " ANTI CODE GRABBING " TRANSMITTERS
The transmitters included with your new security system use the most advanced and
secure form of radio frequency transmission available on any current automotive security
system. Some of today’s sophisticated auto thieves use a device known as a code grabber,
which will receive and store the signal from your keychain transmitter, and re-transmit at a
later time to disarm your system.
Your anti code grabbing transmitters will change their signal every time the button is pressed,
so when a thief grabs then re-transmits your signal, the alarm system
will not respond.
If your transmitter button is pressed more than fifty times while it is out of range of the vehicle
(children playing with your keys), the transmitter will not operate when you return to the
vehicle, and will need to be re-aligned to the receiver. To do this, simply press the Lock button
two times within a one second time period. The system will now respond to that transmitter
each time a button is pressed.
ARMING THE SYSTEM - ACTIVE
1. Turn off the engine, exit the vehicle, and close all doors, hood lid, and trunk lid.
2. Press and release the Lock button on the keychain transmitter.
þ
Red dash mounted LED begins to flash slowly.
þ
Parking Lights flash one time.
þ
Siren sounds one chirp.
If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar.
Simply close the opened entry point to provide full protection. If the siren did
not sound when arming, then the chirps have been turned off, and you
should refer to the section titled " ELIMINATING THE ARM / DISARM CHIRPS "
in this manual.
o
Vehicles horn beeps one time.
If the horn beeps three times, then you have left a door, trunk, or hood lid ajar.
Simply close the opened entry point to provide full protection. If the horn did
not sound when arming, then the chirps have been turned off, and you
should refer to the section titled " ELIMINATING THE ARM / DISARM CHIRPS "
in this manual.
o
Doors Lock - Optional
o
Headlight Illumination - Optional
The vehicle’s headlights turn on for approximately 30 seconds, illuminating
the path as you leave the vehicle.
SILENT ARMING - ACTIVE
1. Turn off the engine, exit the vehicle, and close all doors, hood lid, and trunk lid.
2. Press and hold the Lock button on the keychain transmitter for 2 seconds.
þ
Red dash mounted LED begins to flash slowly.
þ
Parking Lights flash one time.
þ
Siren will not sound.
If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar.
Simply close the opened entry point to provide full protection.
o
Vehicles horn will not beep.
Page 2
