-3-
To check the time with the vehicle ignition switch in the “off”
position, momentarily press the Select button. The display will
illuminate and show the time and then automatically shut off after
5 seconds.
4
BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing
the Select button
3
so that the level number above the “BASS”
indication is flashing. Within 5 seconds of choosing the Bass
mode, press the + or – side of the Level Control
2
to adjust the
bass response as desired. The bass level will be shown on the
display panel from a minimum of -7 to a maximum of 7 (0 is flat
response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
5
TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing
the Select button
3
so that the level number above the
“TREBLE” indication is flashing. Within 5 seconds of choosing
the Treble mode, press the + or – side of the Level Control
2
to
adjust the treble response as desired. The treble level will be
shown on the display panel from a minimum of -7 to a maximum
of 7 (0 is flat response). The display will automatically return to
the normal indication 5 seconds after the last adjustment or when
another function is activated.
6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance
mode by pressing the Select button
3
so that the “bAL” indication
appears on the display panel. The display will then change to
indicate the balance control position. Within 5 seconds of
choosing the Balance mode, press the – side of the Level
Control
2
to adjust the stereo balance to the left channel
speakers or the + side of the button to adjust it to the right channel
speakers. When the volume level between the right and left
channels is equal, “0-0” will be shown on the display panel.
Adjusting the balance toward the right will increase the number
on the right side of the display to a maximum of “0-9” (full right).
Adjusting the balance toward the left will increase the number on
the left side of the display to a maximum of “9-0” (full left). The
display will automatically return to the normal indication 5 seconds
after the last balance adjustment or when another function is
activated.
7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader
mode by pressing the Select button
3
so that the “FAd”
indication appears on the display panel. The display will then
change to indicate the fader control position. Within 5 seconds of
choosing the Fader mode, press the + or the – side of the Level
Control
2
to adjust the front-rear speaker levels as desired.
When the level of the front and rear speakers is equal, “0-0” will
be shown on the display panel. Adjusting the fader toward the
front speakers will increase the number on the left side of the
display to a maximum of “9-0” (full front). Adjusting the fader
toward the rear speakers will increase the number on the right
side of the display to a maximum of “0-9” (full rear). The display
will automatically return to the normal indication 5 seconds after
the last fader adjustment or when another function is activated.
