128-8782b
11 of 12
Page 11
PROGRAMMING NEW OR REPLACEMENT TRANSMITTERS (BANK 1)
Transmitter Model Name Is Found On Back Of Transmitter Case
1) Turn the ignition key to the on position.
2) Press and release the valet/programming switch 3 times (Siren Chirps).
3) Press the Lock Button of each transmitter you want programmed until
you hear a chirp from the horn or siren.
4) Turn the ignition switch off.
The above action programs the Lock, Unlock, Start/Trunk, and Option 1
buttons which are typical for most systems.
For additional channel programming beyond the option 1 button, you can
use any unused button or combination of buttons not in use.
In other words, to access option channel 5, 6, 7, you would do the follow-
ing:
From step 3 above:
a) Press and release the valet/programming button 4 additional times to
get to channel 5, then Press any unused transmitter button or button
combination to program.
b) From a, press and release the valet/programming button 1 time to get to
channel 6, then press any unused transmitter button or button
combination to program.
c) From b, press and release the valet/programming button 1 time to get to
channel 7, then press any unused transmitter button or button
combination to program.
Note:
Not all systems have channels above 3, check with your installation
center for options your system may or may not have.
