6
Maintenance
Though your monitor requires little care, you can still maintain its condition
and performance by following the procedures below.
•
Keep your system away from excessive moisture, extreme heat or cold,
and magnetic fields.
•
Keep liquids away from the display.
•
To avoid damage, do not place external devices or other objects on the
top of the monitor.
•
Occasionally wipe the monitor with a soft, damp cloth.
3
3.
Installing the Control box:
•
Monitor: Connect the 8-pin female monitor extension cable
connector to the monitor 8-pin male cable connector. Route the
monitor extension cable to the under dash area. Connect the 8-pin
male monitor extension cable connector to the control box 8-pin
female connector. Secure the control box.
•
Power harness: Connect the power 4-pin connector to the control
box 4-pin connector. Attach the 4 wires in the harness as listed
below.
4.
Electrical Connections:
Attach the 4 wires to the appropriate power source as listed below.
a)
Red wire -
12 volt constant (positive)
b)
Black wire -
Chassis ground (negative)
c)
Blue wire -
12-volt ignition (12 volt with ignition on)
d)
Green wire -
Reverse light (12 volt when vehicle is in the
reverse gear)
WARNING
: Observe polarity when connecting the wires.
Figure 2
. System Connections
Red (+12V)
Blue (Ignition)
Black (GND)
Green (Reverse)
To Rearview Camera
To Interior Camera
To LCD monitor
To Filter BOX
To Control BOX
Cam Button
Selector Switch
Control BOX
Filter BOX
