2
Preface
This video monitor can display up to 3 different video inputs. The inputs are
Navigation, Rear observation camera and Interior observation camera.
INSTALLATION INSTRUCTIONS
Figure 1
. Backside of Monitor
The monitor can be mounted by two different methods.
•
AMPS compatible mounting pattern for bracket or gooseneck
•
T-slot for Fan Bracket.
Select the appropriate mounting location that is visible to the driver and does
not obstruct the drivers view thru the windshield.
1.
Installation using mounting bracket method.
•
Use the 4 screws to tighten the selected AMPS hole pattern
bracket onto the back of the monitor display.
•
Attach the mounting bracket to the selected mounting location.
2.
Installation using mounting T slots.
•
Slide the T-bolt into the T- slot on the back of monitor display.
•
Tighten the T-nut until snug with the T-slot on the back of the
monitor.
•
Remove the protective plastic from the doubled sided tape on the
fan bracket. Then place the fan bracket on the chosen location.
Screw holes for
mounting bracket 1
T slot for mounting
bracket 2
7
Illustration of Connections
Figure 4.
System Connections
Control Box
Connector
Connector
Connector
Connector
Filter Box
Interior camera
Rearview camera
Red
Black
Blue
Green
Fuse
Fused +12V Constant
Ground/Shield
Ig12V Source
Reverse Switch
LCD Monitor
Navigation
Compute
r
Cable Plug for
Navigation
Connector
