128-8333
12 of 30
12
Down Channel/Volume Button (11)
In the standby mode, pressing this button will decrease the listening
volume. When in function edit mode this button will be used to adjust the
unit’s settings.
M
ODE
/
WB
Button (12)
This button is used to select the various feature settings in the GMRS/FRS
or scanner modes.Holding the MODE/
WB
button longer than 2 seconds
will toggle between the GMRS/FRS and
weather band
modes.
External Microphone (MIC)/Speaker (SPK)/(CHG) Jack (6)
This jack accepts the supplied Audiovox Earbud/microphone connector, or
the Charging Adapter. For the equipment and accessories supplied with
the GMRS1882CH, refer to Page 7 and/or visit the Audiovox web site at
www.audiovox.com
.
VOX Button (14)
Press and hold this button for more than
1
second to enable or disable
the VOX mode; the
VOX
icon will appear in the lower right corner of the
display when enabled.
Oper ating M odes and F eatur es
GMRS Operation:
- From GMRS/FRS standby mode, press the ( ) button for about 2
seconds to turn on power.
- Press the MODE button so the Channel number flashes.
- Select the desired channel with the Up (10) and Down (11) Buttons.
When receiving a call, the
RX
icon appears to indicate the incoming
signal.
- Press and hold the PTT button (4) to transmit, then speak into the
microphone clearly and slowly.The Transmit Signal Level indicator
(
) will display the relative strength of the transmitted signal.
- Release PTT Button (4) to receive.
- Communication can only be accomplished when the channel and
