Scrolling to the beginning of the function setting mode
Press the Function/lock button six times
The channel number will flash on the display, beginning the function selection sequence
again. If the conformation beeps are on, a double tone will be heard.
Warning
•
Remove the batteries from the transceiver if it is not expected to be used for
long periods. This will eliminate the possibility of chemicals leaking from the
batteries and corroding the transceiver.
•
Avoid exposing the transceiver to water or extremes of temperature.
•
Do not use this device in or near a mining facility, which uses remotely
triggered explosives or in areas labeled “Blasting Area”. Premature or
accidental detonation may result.
•
Do not attempt to modify or in any way increase the output of this transceiver.
Its output is designed to meet the legal limits set by the F.C.C.
Do not use this device or change its batteries in potentially explosive atmospheres
as sparks in such areas could result in an explosion.
•
Turn your transceiver off wherever posted notices restrict the use of radios or
cellular telephones. Facilities such as hospitals may use equipment that is
sensitive to RF energy.
•
Turn your transceiver off on board aircraft when requested to do so.
•
Do not place your radio in front of a vehicle’s air-bag. If the air-bag deploys,
it could propel the transceiver like a projectile causing bodily injury.
This transceiver complies with F.C.C. regulations for use in the United States of
America. Use in other countries may be prohibited or restricted by local
regulation. Please check with the local regulating agency before using this
device outside the United States of America.
128-5379C
8 of 12
7
