E - 34
Video Output
1. Press the
SETUP button.
2. Use or button to select Video, then press the
ENTER button.
3. Use
or
button to select Video Output, then press the
ENTER button.
4. Use
or
button to shift and select the signal, then press the
ENTER button.
5. To exit the FUNCTION SETUP MENU and return to the normal screen, press the
RETURN button.
Attention :
Always set Video Output in CVBS, otherwise, the picture on the TV may be distorted. If this occurs, and you cannot
see the screen, press the
P. SCAN button twice until the "CVBS" display.
(continued on next page)
Customizing the Function Settings
Brightness
1.Press the SETUP button.
2.Use or button to select Video, then press the ENTER button.
3. Use
or
button to select Brightness, and then press the
ENTER button.
4. Use
or button to shift and select the Off/On, then press the
ENTER button.
5.If you want to exit the SETUP MENU and return to the normal screen, press the RETURN button.
Note:
• Actual effect on pictures will vary depending on the TV.
On : Picture will be brighter to clarify details.
Off : Picture will have deepened colors.
CVBS: Corresponding to your TV which has a Video or S-Video input.
YUV: Corresponding to your TV which has a YUV input.
151AUD32-40_E.pmd
4/26/2004, 11:55 AM
34
