Audiovox DV1532 Owner'S Manual Download Page 20

Page: 20 / 44

E - 19

(continued on next page)

Playing a Disc

DVD

Basic playback

This owner’s manual explains the basic instructions of this DVD Unit. Some DVD discs are produced in a

manner that allows specific or limited operation during playback. As such, the DVD Unit may not respond

to all operating commands. This is not a defect in the DVD Unit. Refer to the instruction notes of discs.
“

” may appear on the TV screen during operation. A “

” means that the desired operation is not

permitted by the DVD Unit or the disc.

Playing a Disc

1.While the unit is in standby mode, press FUNCTION button to select DVD mode. It will take a while for disc holder

automatically rotating to load disc 1.

2.If the display shows “Load” or “NO DISC”, press the OPEN / CLOSE button. The disc tray opens..
3.Press DISC 1 - 5 select button on the remote control, after a while, the disc tray will automatically close and then

open. Disc holder will automatically rotate one cycle and stop.

4.Place the first disc on the disc holder with the label side up.
5.Press DISC 1 - 5 select button on the remote control or DISC SKIP button on the front panel to rotate disc holder

to load other discs.

6.Press the OPEN / CLOSE button. The disc tray closes..

It takes a short while for your unit to load the discs. After loading, for some discs, the unit will automatically start
playback of the disc.

7.Press the PLAY button.
8.Press DISC 1 - 5 select buttons or DISC SKIP button on the front panel to select other disc playback.
Notes:
• Use the

OPEN / CLOSE button on the front panel to open or close the disc tray. Do not push the disc tray or you

may damage the Unit.

• Let the disc tray open completely before removing the discs. Press the

OPEN / CLOSE button to close the disc

tray after you remove the discs.

• If you use the

OPEN / CLOSE button on the front panel to open the disc tray, the unit will stop playing. The disc

holder will rotate half circle so that the disc can be taken out. If you use the

OPEN / CLOSE button on the remote

control to open the disc tray , the playback will not be affected.

Pausing playback (still mode)

Press the

PAUSE button. To resume normal playback, press the PLAY

Y button.

Stopping playback

Press the

STOP button at the location where you want to interrupt playback. To resume playback at the position

where the disc was stopped, press the

PLAY button.

If you press the

STOP button twice, the Unit’s memory will be cleared and pressing the PLAY

Y button will reset

the disc to the beginning.

To skip to a different track

• Press the

SKIP button once to skip to the start of the previous track.

• Press the

SKIP button to skip to the next track.

• For audio CD disc, use the number buttons (remote control only) to jump straight to that track number.
Notes:
• During playback, disc tray can be opened/closed to add disc and the current disc playback will not be interrupted

(only by pressing

OPEN / CLOSE button on the remote control).

• The

(SKIP) buttons can only be used to choose a track of the current disc. To choose a track of another

disc,

DISC 1 - 5 select buttons or DISC SKIP button should be pressed to get to the desired disc first.

Turning on the unit

Press the

power button on the front panel, the STANDBY indicator will

light up. Then select the desired function by pressing the

FUNCTION button.

Note: Remote control can turn on the unit only if the unit is in standby mode.