33
O. Connecting to a TV or another monitor
( Refer to Figure 6)
You can also connect the DVD player to a TV to enjoy high quality
stereo audio and video on another monitor. To connect the DVD player
to a monitor requires the purchase of an audio/video cable. The cable
is readily available at most electronic retailers. The cable consists of
three RCA jacks with the colors red and white corresponding to right
and left audio channels and the yellow RCA connector is the video
signal. The purchased cable can then be connected to the supplied
AV adapter cable which then interfaces to the DVD player.
1. Connect one end of the audio/video adapter cable
’
s black (1/8
”
stereo
plug) plug into the unit
’
s DVD AUDIO OUT jack, and connect the other
end to the AUDIO INPUT jacks on your TV or Monitor (white = left channel,
red = right channel).
2. Connect the audio/video adapter cable
’
s yellow plug into the DVD VIDEO
OUT jack on the back of the unit, and the other yellow plug to the VIDEO
INPUT jack on your TV or Monitor.
Figure 6
* Optional wired headphones may be used with the unit. Simply plug in
the headset to headphone jack.
Cable Purchased
Separatly
PDF created with FinePrint pdfFactory Pro trial version
http://www.fineprint.com
