FIG. 4
ANTENNA WIRE
GROUNDING STRAP
ADAPTOR HARNESS
(supplied)
M6 x 18
SCREWS
RADIO INSTALLATION:
1. Remove dash panel from vehicle to expose sub-dash.
2. Remove and discard radio dummy panel attached to sub-dash.
NOTE:
Do not discard hardware for dummy panel.
3. Pre-wire radio including antenna wire. Attach ring lug on ground wire (black w/white stripe) from radio
harness side and the vehicle side grounding strap to the rear of the radio chassis using the M5 x 8 screw
provided. See Fig. 4 below.
4. Install radio into sub-dash of vehicle using the M6 x 18 self-tapping screws provided.
5. Conduct a brief performance test to verify proper operation.
6. Replace dash panel.
RADIO HARNESS
GROUND WIRE
(black w/white stripe)
M5 x 8
SCREW
