128-6601
3 of 4
To Remote Start The Vehicle:
Press and release the proper button or combination of buttons on your keychain
transmitter to activate the remote start system. The vehicle will start and
remain running for the pre-programmed 10 or 15 minutes. As a visual indica-
tion, the parking lights will flash or turn on dependent on the programming set
up by your installation center.
When you arrive at your vehicle, unlock the vehicle by pressing and releasing
the unlock button of your keychain transmitter or by use of the vehicle key. Enter
the vehicle and turn the ignition key to the on position.
CAUTION!
Do not turn the key to the start position. This will cause the starter
motor to engage
with the already running
engine which could result in damage. Step on the brake
pedal to disengage the remote start unit. The vehicle will continue to run on it's
own power.
NOTE:
The engine will stop running before the expiration of the pre-pro-
grammed run timer
if you complete any of the
following:
1. Pressing the proper button or buttons of your keychain transmitter while run-
ning under
control of the remote start system will turn
the vehicle off.
2. Depress the brake pedal.
3. Open the hood.
4. Move the red handled control switch to the off position.
5. Race the engine to above 4000 RPM.
OPERATING ON AUTOMATIC START UP TIMER MODE
The system has the ability to automatically start the vehicle every 2 or 4 hours
over a 48 hour period. This feature is especially useful in cold climates where
the only means to keep the engine and engine fluids warm is to periodically
start the engine.
CAUTION! Be certain that the vehicle is outdoors before using this or any re-
mote vehicle starting device. A running engine produces dangerous carbon
monoxide fumes which can be harmful or fatal if prolonged exposure occurs.
DO NOT remote start the vehicle if the car is garaged.
Page 3
