u
SIng
t
he
ar5100
9
Remote control
The remote control that came with the AR5100 can operate the
functions of an iPod that is docked.
IMPORTANT:
The remote control
cannot be used to control the playback functions of the auxiliary
source. For these audio sources, the remote control and main unit
controls can only be used to adjust the volume level, mute, and power
functions for the AR5100.
(Power)
Turns the AR5100 on and
off. Also brings a docked iPod out of
sleep mode when the AR5100 turns on.
(Play/Pause)
Starts and pauses
playback on your docked iPod.
(Mute)
Lowers the AR5100 volume
to its minimum level.
(Skip back)
Goes to the previous
track (or to the beginning of the song
currently playing) in the current playlist
on your docked iPod.
(Skip forward)
Goes to the
following track in the current playlist on
your docked iPod.
VOL— / VOL+
Turns the AR5100
volume down or up.
The battery in the remote control may be changed as needed.
Usually this will only be necessary every one to two years; however,
the battery may be changed at any time when the remote control’s
effectiveness has diminished.
