8
GENERAL SYSTEM CONFIGURATIONS:
The following is intended to provide some of the system configurations that are possible
with the ADV48 Drop Down Video Systems:
The ADV48 has an option that allows the user to select from two IR transmit and receive
codes (M1 or M2). This feature can be used when using two ADV48s in the same
installation or if the vehicle has an RSA (Rear Seat Audio) that uses an “A” channel
headset. The ADV48 comes factory set to M1. When in the M1 mode the unit will respond
to remote commands when M1 is selected on the remote and will transmit audio on the A
channel. When in the M2 mode the unit will respond to remote commands when M2 is
selected on the remote and will transmit audio on the B channel.
Note:
OSD will appear on the screen for 4~5 seconds
Selecting a Monitor Code (M1 or M2)
1.
Press and hold the
SOURCE
and
FMM
buttons on the unit
for 3 seconds and the unit will
switch from M1 to M2
or M2 to M1.
2.
The selected mode (M1 or M2) will be retained in memory until changed by the user.
Notes:
The following option can be added:
Wired relay box for wireless FM Modulator (P/N SIRSWB).
The ADV48 video system is only intended for an overhead, drop down installation. It
is not intended for Seatback or any other type of mounting. The hinging mechanism is
designed for horizontal, drop down use only.
The two pods can be connected together using the 8010730 accessory cable plugged
into the AV1 Din connector on one pod and plugging the RCA connectors into the AV
out RCA connectors on the other pod. Two 8010730 cable can be used to allow the
video program on each pod to be viewed on the other.
FMM OFF
M2
DVD
IRT OFF
FMM 88.3MHz
M1
AUX/GAME
IRT ON