5
7. Make all necessary wiring connections to VCP. Check
function of VCP and video system. See operating
instructions included with components. For further
assistance, refer to the video system manual for the
technical support phone number listed for your area.
Install VCP and tighten screws. Make sure VCP
screws are positioned at bottom of slot.
CAUTION: Do not overtighten screws.
See Figure 7.
8. Install housing bottom (item 5 pg 2) and secure to
bracket by inserting clips into slots and pressing
firmly. Make sure contour of housing matches floor
of vehicle prior to securing clips. See
Figure 8.
9. Carefully install housing top and press firmly along
bottom edge to secure Velcro tape.
See Figure 9.
FIGURE
7
FIGURE
8
FIGURE
9
