128-7410
2 of 20
Page 2
SELECT
ABLE FEA
TURES
The selectable features can be set manually as explained below
, or with the RF feature programmer
.
T
o
set features using the RF programmer
, follow the instructions packaged with the programmer
.
Factory default settings are indicated by bold text.
Note :
The method of manual override can either be selected to operate from the valet switch or operate as custom code.
Be certain to place a check mark indicating the method used in the box located on the last page of the owner's manual.
NOTE: Keyless Entry Models with no horn output will Flash the Parking Lights instead of chirp where chirp is indicated.
Also, No data will be indicated if a feature is not available for a particular model. The unit will enter the feature but no s
election will be available.
RF Programmable Feature Bank 1 Is For T
ransmitter Programming See T
ransmitter Programming Guide.
RF Programmable Features Bank 2 Is Alarm Selectable Features:
Feature Selection
1 Chirp
2 Chirps
3 Chirps
4 Chirps
5 Chirps
6 Chirps
1st DoorL/UL
1 Sec.
3.5
Sec.
1 Sec L, Dbl. U/L
Dbl L, 1 Sec UL
Dbl
L,
Dbl
UL
1
S
l/350mS
ul
2nd Accy Lock
Auto
Lock
On
Auto Lock Off
3rd Accy
.
UL
Auto UL All
Auto UL Off
4th Headlights
Not Available
5th Passive Locks
Not Available
6th Pass/Act Arm
Not Available
7th Siren/Horn
Not Available
8th Horn Chirp
Not Available
9th O/R Method
Not Available
10th 2 Step U/L
Not Available
1
1th Chp Del Tx
Not Available
12th V
oltage/Hd W
ire
Not Available
13th Trigger Circuits
Not Available
14th Lock/Unlock Poll
Not Available
When using the RF programmer
, enter the program mode as follows:
Turn the ignition on
Press and release valet/program switch 3 times
turn ignition off then on
Press and hold valet/program switch for 5 seconds
Siren chirps 2 times indicating access to RF feature program mode.
