8
2009 Audiovox Electronics Corporation. All rights reserved.
Adding Remote Controls to Your System
The PROPLM Security System has the ability to operate from up to 4 remote
controls. Follow these steps to add a remote control to your system.
1.
Make sure the system is disarmed and the ignition is off.
2.
Turn the ignition on.
3.
Press and release the override button 3 times the system will chirp 1
time indicating the system has entered programming mode.
4.
Press the LOCK button on the remote to be programmed. The horn will
sound once, indicating that the system has learned the remote.
5.
Repeat step 4 for any addition remote controls.
6.
Turn the ignition off to exit the programming mode.
Deleting Lost or Stolen Remote Controls from Your System
If one of your remote controls is lost or stolen, follow these steps to remove it from
your system:
1.
Have all of the remaining remotes available
2.
Enter the remote control programming mode by following steps 1-4
from Adding Remote Controls to Your System shown above.
3a.
If you only have 1 remaining remote, press the LOCK button 4
times, pausing for one second between each press. The horn must
honk each time you press the button.
3b.
If you have 2 remaining remotes, press the LOCK button on
each remote 2 times, pausing for one second between each
press. The horn must honk each time you press the button.
3c.
If you have 3 remaining remotes, press the LOCK button on
the first remote 2 times and 1 time on the following 2
remotes, pausing for one second between each press. The horn
must honk each time you press the button.
4.
Turn the ignition off to exit the programming mode. The lost or stolen
remote will no longer operate the system.
