7
2009 Audiovox Electronics Corporation. All rights reserved.
Emergency Disarm Procedure
If your remote control is lost or fails to function, use this procedure to disarm the
security system and start your vehicle.
1.
Use the keys to enter the vehicle. The alarm will sound once the door
is opened.
2.
Insert the key into the ignition and turn to the ON position.
3.
Press the valet button. The alarm will turn off and then you will be able
to start the vehicle. The valet button is located on the housing of the
status LED light.
System Maintenance
Changing the Remote Control Battery
The 3 volt lithium battery (model CR2032) inside each remote control should last
approximately 1 year under normal use. When the battery becomes weak you will
notice the remote control range (the distance from the vehicle the remote control
will work) deteriorate and the small LED on the remote control will dim. To replace
the remote control batteries:
1.
Gently unsnap the halves of the remote control apart using a small flat
head screw driver.
2.
Unsnap the lithium battery out of the circuit board, observing the +/-
symbols on the battery and replace with a new lithium 3 volt battery
(model CR2032)
3.
Gently snap the halves of the remote control back together.
4.
Test operation of the remote control.
Number of flashes:
1 - Interior Theft Sensor (Shock Sensor)
2 - Door Input
3 - Hood Input
4 - Trunk Input
5 - Ignition
