Audiotricity CHIMERA, Owner'S Manual

Page: 11 / 25

11
© AUDIOTRICITY 2014, ALL RIGHTS RESERVED
Unpacking the Chimera Signature from the case
When the power conditioner is still in its case, please move it to a location near the place where
it will be installed. Remove any metal object like watches and rings to avoid any scratch in the
unit’s chassis. Put on the included white lifting gloves to avoid leaving fingerprints on the chassis
as well.
Installation requirements
The surface that will support the Chimera Signature power conditioner must be capable of safely
supporting the nearly 16kg weight of the power conditioner.
The power conditioner doesn’t need too much ventilation, it can be mounted tight in the rack
without regard for air flow.
For best possible sound quality and maximum output, we recommend you connect the Chimera
Signature power conditioner to a dedicated 15-amp outlet or if possible to a 32-amp direct
connection.
WARNING: This unit is not water proof. DO NOT submerge unit in water or any other fluid. DO NOT
operate unit in an environment of water condensation. DO NOT operate unit with standing water
on the floor.