6
2. Hardware Installation
To install all components of MAYA properly, you should install
the PCI card first and make all audio and header pin connections
before
you install MAYA Driver and Control Panel software. If
you follow the instructions on this section in the sequence that it
is written, you will have properly installed all components.
S Y S T E M R E Q U I R E M E N T
Because MAYA’s dependence on CPU is very low, you can
use MAYA on virtually any Pentium based system. Your first
consideration should be the system requirement of audio
application of your choice. If the audio application’s system
requirements are met, then MAYA will run without any problem.
1. PCI 2.1 compliance Motherboard
2. Windows 95/98/98SE operating system
3. 1 open PCI slot
4. 32MB RAM
5. Digital audio recording/playback software
Warning!
The components in your PC and on the MAYA
board are sensitive to electrostatic discharge.
Follow these precautions to avoid damage caused
by static electricity
.
