36
4. Explanation of the main functions
4.3 Input Select menu
The Input Select menu is used to select the different input sources of the connected device. Depending on the connect
-
ed device the following sources are available: Main, HEC/MEC/AUX and Digital optical. In addition the control dial can
be used to control the volume of the active source. The adjustment range is from - 60 dB to 0 dB and is displayed below
the buttons. The increments are graded in 0.5 dB steps.
Note:
The manual switching between input sources by the DIRECTOR needs a specific configuration in the DSP PC-Tool.
Each source signal detection in the DCM menu has to be set to “Manually via Remote Control”.
4.4
Bluetooth
®
Connect menu
The DIRECTOR allows the direct control of the HEC/MEC BT extension module. The
Bluetooth
®
Connect menu con
-
tains the following functions to control the connection:
• Connect: The
Bluetooth
®
module tries to establish a connection to the last connected device
•
Pair: Activates the
Bluetooth
®
pairing mode
• Disconnect: Disconnects the actual
Bluetooth
®
connection
•
Volume control: The control dial can be used to control the volume of the connected source in 0.5 dB steps.
The assigned
Bluetooth
®
module name is displayed below the buttons. The name can be changed in the DSP PC-Tool.
