33
3. Initial operation
3.1 Connection of the DIRECTOR to the DSP
After turning on the sound system the DIRECTOR will automatically establish a connection to the DSP.
The window is shown on the DIRECTOR`s screen during connection. Pressing the DIRECTOR Update activates an
update mode for the internal DIRECTOR`s firmware.
Note:
The connection setup can take a few seconds.
3.2 Activation of the DIRECTOR
In order to use the DIRECTOR the device has to be activated / registered in the DSP. If the connection is successfully
done and the DIRECTOR is not activated / registered in the DSP the following message will appear:
By confirming the warning message the DIRECTOR will be temporarily activated.
Note:
The temporary activation has to be repeated after every restart. For safety reasons the volumes for HEC/MEC/
AUX and Digital Optical will be set to -60 dB (mute) after confirming the warning message.
It is strongly recommended to permanently activate the DIRECTOR in the DSP PC-Tools DCM menu.
