4.7 Combining multiple drivers
4.7.1 Master to Slave over Slave
Master unit
Slave unit 1
»OUT« Output
is connected to the
»IN« Input of unit 1, Output »OUT« is
of the Master
connected
to
Slave unit 2
Slave unit 3
»IN« of Unit 2,
is connected to
»IN« of unit 3, »OUT« is
Output »OUT«
connected
to
Slave unit 4
the »IN« of unit 4 etc...
To establish a low overspill or high coverage system for very large areas:
- Connect
the »OUT« jack socket of the Master loop driver to the »IN« jack of the next
loop driver (Slave unit 2).
-
Connect the »OUT« jack socket of unit 2 to the »IN« jack of the next loop driver (unit 3).
- Connect
the »OUT« jack socket of unit 3 to the »IN« jack of the next loop driver (unit 4).
-
Connect the »OUT« jack socket of unit 4 to the »IN« jack of the next loop driver (unit 5).
- Repeat
this sequence as needed
- Connect the respective phase-shifted loops to the »speakON« connectors on the ac-
cording drivers.
- Power all components up and adjust accordingly.
This
allows you to install an inductive loop system in vast areas like exhibition halls and
stadiums.
32 English
A-4286-0_ProLoop-D15-LOS_DE-EN-FR_2020-03-16.indd 32
16.03.2020 15:17:09
