Page 8
ENGLISH
SUBMIX - USB Full duplex 6-channel mixer with active filter
7 - Crossfader:
Allows you to combines several channel outputs. When on the left (A), only channel A signal can be heard.
When on the right (B), only channel B can be heard. The middle position indicates both channels are equally
audible.
8 - CUE mixing control knob:
Allows you to monitor the channel selected via the CUE button and PGM level via your headphones, choosing
which one is more audible.
9 - Headphones volume control knob:
Allows you to adjust the headphones sound level. Turn it clockwise it increase the volume.
Please make sure this knob is fully on the left before connecting your headphones.
10 - SPLIT CUE button:
Allows you to select the source sent to the headphones output.
In normal mode, the headphones will receive the CUE and Master signals, which can be adjusted via the CUE
mixing control knob.
In CUE SPLIT mode, the CUE signal will be sent as mono signal to the left, while the master signal will be
sent to the right.
This function also assign the VU meter in the same way.
11 - Headphones output (PHONES):
Stereo Jack 6.35 allowing you to connect your headphones to your device in order for monitoring purposes.
Please make sure the headphones volume is at its lowest before connecting it.
12 - ZONE:
Allows you to adjust the volume of the ZONE output via the rear panel.
This output allows you to add an extra amplifier, independent from the Master output.
Please make sure the volume is at its lowest before connecting your device.
13 - SUB WOOFER:
Allows you to adjust the signal volume of the SUB WOOFER / LIGHTING output (rear panel). This output
allows you to control an amplified subwoofer or lighting device to activate its music-sensitive mode.
14 - FREQ.:
This knob allows you to adjust the cutoff frequency of the SUB WOOFER / LIGHTING output active filter. You
can then adjust basses according to your sound system or location of your installation. Can be adjusted from
40 Hz to 200 Hz.
15 - MASTER BALANCE:
Allows you to adjust the left/right panning level of the Master output signal.
16 - POWER Indicator:
Indicates if your device is activated/deactivated.
17 - POWER Button:
Activates/deactivates your SUBMIX.
Please make sure your amplifier(s) is deactivated before activating your mixer. Then proceed in reverse
order by deactivating the amplifiers first, then your SUBMIX.