Page 10
ENGLISH
SUBMIX - USB Full duplex 6-channel mixer with active filter
4.2 - Rear panel
1
2
3
4
5
6 7 8 9 10
11
14
12
13
1 - Power input:
Connect here your power cord.
2 - USB Port:
Allows you to connect a computer equipped with USB ports. Your SUBMIX acts as sound card and only
requires a few moments for the internal interface to be detected by your computer. Once identified, your
SUBMIX will be considered as an audio device.
The USB port allows you to play and record audio files from your computer.
All you need to do is connect your SUBMIX to your computer, the drivers will install automatically.
You will then be able to play MP3, WMA, WAV (etc.) audio files.
You can also record your current mix on your computer.
The USB port can both play and record at the same time: that is the Full Duplex system.
The USB interface is detected as standard USB sound card (USB Audio Device or USB Audio CODEC).
All audio signals from your computers will be transmitted to your SUBMIX via the USB cable, allowing you
to benefit from both the many possibilities offered by your mixer and the audio database of your computer.
3 - SUB WOOFER / LIGHTING output:
Allow you to connect an amplified subwoofer or lighting device to synchronise its programs with the music.
4 - MASTER XLR output:
This is the main output, allowing you to connect a balanced amplifier.
5 - ZONE output:
This is the second output of your SUBMIX, allowing you to connect an unbalanced amplifier.
6 - TRIM:
This knob allows you to increase or decrease the Master output signal level to protect your speakers and
amplifiers from excessive sound levels.