audiophony CDX6, Operating Instructions Manual

Page: 43 / 44

SW name Type MIDI MIDI2(Hold SHIFT) Remarks
< (RED) LED 35 35
1 (RED) LED 36 36
2 (RED) LED 37 37
4 (RED) LED 38 38
8 (RED) LED 39 39
> (RED) LED 3A 3A
1/2 (GREEN) LED 3B 3B
3/4 (GREEN) LED 3C 3C
1/1 (GREEN) LED 3D 3D
2/1 (GREEN) LED 3E 3E
TEMP RANGE 6 LED 3F 3F
TEMP RANGE 16 LED 40 40
LOOP SET
LED
LED
41 41
A. CUE SCRATCH LED 42
43 43
42
NORMAL
DISC EJECT SW 0D 4C
SGL/CTN SW 01 40
TIME SW 1F 5E
SHIFT SW 45 --
ENTER SW 16 55
<< SW 1C 5B
>> SW 22 61
CUE PLAY SW 28 67
TAP SW 07 46
PITCH BEND - SW 03 42
PITCH BEND + SW 09 48
CC-ABSOLUTE (VR)
Control Change messages are sent with status 0xBn, where n is the channel, for the specified CC controller. Thus
the controller MIDI ID is indicated with the channel along with the CC number. The value from 0x00 to 0x7F, directly
related to the location of the controller.
CC-RELATIVE (ENC)
Control Change messages are status 0xBn, where n is the channel, for the specified CC controller. Thus the controller
MIDI ID is indicated with the channel along with the CC number. The values from 0x40 indicate the change in the
controller. This is an offset to 0x40 “one’s complement” notation.
A message with data 0x43 indicates a
positive change of 3.
A message with data 0x31 indicates a negative change of 15.
SWITCH ON/OFF (SW, CENTER, CW, CCW)
These messages are used for switches.
Control Change messages are sent with status 0x9n, SWITCH ON and OFF value are 0x7F and 0x00, where n is the
channel.
LED ON/OFF (LED)
These messages are used for LED.
Control Change messages are sent with status 0x9n, LED On and Off value are 0x7F and 0x00, where n is the
channel.
MIDI MAP (Hexadecimal)
Page 43