Audionet PRE, User Manual, Page: 5 / 9

5
*
Inputs, which usually have different signal level, can be adjusted to
the same volume
*
Inputs can be given an individual name, e.g. "CD1", "CD2",
"Darling" etc.
*
The inputs No. 1 to 6 at the rear can be given a new channel
number. You can create a new channel sequence, which you can
select with the input button at the front panel or the remote control.
The two line alphanumeric display will give you all information you
need about settings:
*
First line: channel, given name of the channel, assigned input
*
Second line: master volume level, programmed volume level offset
For selecting the function, which should be programmed, please press
the
set button at the front panel.
For programming, please do the following:
1) Push the set button once for a short time.
2) Turning the volume knob clockwise decreases the level of the left
channel, turning counterclockwise will decrease the right channel’s
level.
The level of every channel can be decreased up to 9 dB. The setting
is displayed numerically and by arrows.
3) Push the set button four times to leave the programming menu or
once for ‘volume offset’ and continue with step 3) of the following
Display
B
alance