Audionet PRE, User Manual, Page: 2 / 9

2
How to operate the Audionet PRE
Audionets PRE is a high performance audio pre-amplifier. This
system is designed for absolutely natural music reproduction and for
highest user comfort.
The following will give you all information about how to operate your
PRE. Please read this carefully before the first use. Following these
instructions, your PRE will give you long-lasting pleasure and
satisfaction.
I) Connecting the system
Please connect the power jack (1) at the rear with your wall outlet
(Please refer to page 8). Use the provided powercable or another one
allowed for your homecountry specifications.
NOTE:
The power specifications (2) on the rear must meet to your
homecountry specifications.
The mains-button (3) at rear must be switched off.
PRE is a very sensitive system. Please ensure that all used connector
cables are in absolutely best condition.
For connecting or removing audio sources, PRE has to be switched off
(stand by-state) or must be muted.
PRE has one balanced and five unbalanced high level inputs (4). Due
to the dual mono construction, left and right inputs are separated at the
rear. Please connect left and right inputs to the corresponding outputs
of the designated high-level sources, like CD-player, D/A-converter,…
PRE has two balanced as well as one line and one inverted unbalanced
outputs (5) for connecting power-amplifiers.
Please connect left and right channel to the corresponding inputs of
your power-amplifier. If bi-amping is desired, please use the two
balanced or the line and the inverted outputs. In the second case, you
have to change the loudspeaker polarity of the one amplifier, that is
connected to the inverted PRE-outputs (change plus to minus and
minus to plus). If you are unsure, your dealer will help you.
Power supply
Audio sources
Inputs
Outputs