7
To activate the monitor input please push the
monitor/set
button for a
short time. The originally selected input remains active for recording.
This input can be chanced during the monitor loop is activated, of course.
To come back to the standard input simply press the described button a
second time.
Your PRE 1 G2 is programmable for functions providing you with new
and easy possibilities to adjust the system to your needs. All individual
settings will be remembered, also when PRE 1 G2 will be switched off the
mains or transported.
You can program the following:
¨
The balance can be adjusted to individual preferences
¨
Inputs, which usually have different signal level, can be adjusted to the
same volume
¨
Inputs can be given an individual name.
¨
The brightness of the display can be adjusted ("Dim Value")
¨
Automatic startup can be switched on or off ("Autostart")
¨
You can choose between two texts being displayed while in stand-by
mode ("Off_Text")
The 2-line alphanumeric display will give you all information you need
about your individual settings:
§
Number of selected input and given name of input or number of se-
lected input and monitor or assigned name
§
Volume and assigned offset, visualized balance setting as well
Monitor loop
Programming
Display
