4
The Audionet PRE 1 G2 has one unbalanced output (5) and one balanced
output for connecting power-amplifiers.
Please connect left and right outputs to the corresponding inputs of your
power amplifier.
Two recording systems can be connected at the same time to PRE 1 G2
for recording and playing back simultaneously.
For recording please connect the inputs of your recording system, like
DAT or tape deck with the
rec
output (6) of your PRE 1 G2. Every time
when the recorder is connected to the rec outputs, please use the inputs
No.5 named "Tape" for playing back.
When input No.5 is selected, the corresponding rec output will be muted.
This is necessary to prevent destructive oscillation of the pre amplifier and
the recorder. Therefore every signal source that should be recorded has to
be connected to the remaining inputs.
Your PRE 1 G2 is fitted with a monitor loop. This enables you to listen to
the recorder without interrupting the signal source being recorded. To use
this feature please connect the inputs and outputs of the recorder with the
corresponding monitor output and input (7) of your PRE 1 G2.
Your PRE 1 G2 can be equipped with an optional phono preamplifier. For
connecting a record player please use the input 6 and the corresponding
ground connector in this case.
In combination with the Audionet AMP I/AMP II and/or DAC the PRE 1
G2 can switch on and off the whole system. Please connect the Audionet
link (8) on the rear with a Toslink optical fibre cable to the Audionet link
of AMP I and/or DAC.
Outputs
Recording systems
Rec out
Monitor
Phono
Audionet-link
