5
Connections
At the rear there is a pair of WBT cinch sockets (stereo) for connecting
the turn table as well as the inputs labeled C/Rext for additional resistors
or capacitors to adjust to the electrical characteristics of the pick-up.
Base capacity of the ‘PAM V2’ is 150pF. The gold plated screw (GND)
is for connecting the turn table ground.
At the rear you will also find the outputs. You can use either balanced
out (XLR, Neutrik sockets) or line out (WBT, cinch sockets) to connect
your ‘PAM V2’ to your pre- or main-amplifier.
Inputs
Outputs