5
input resistance for optimal adjustments to all kinds of available pickup systems. For
further details please refer to the user's manual of the phono card.
Digital Inputs:
Connect your digital sources to digital inputs 1 to 5 10. By factory default digital inputs
2,3 and 5 are setup for multi channel decoding (Dolby Digital and DTS
**
). Digital inputs
1 and 4 are setup for stereo PCM signals (all default setting can be changed by the user
in the setup menus!). If you have the optional RF-Demodulator card installed, connect
the 'RF AC-3' output of your LaserDisc-Player to digital input 4 9.
Note:
Do not forget to set the option '
Set RF-Demod.
' to '
available
' in the
"Global Setup"
menu. You also have to remove the blue jumper on the input PCB.
In order to send DVD-Audio music data across the HighBit interface from the DVD
player Audionet VIP
1)
to the MAP V2.0, connect digital output 1 of the VIP with digital
input
DIGITAL IN 2
of the MAP. Furthermore, you need a second connection running
from digital output 2 of the VIP to digital input
DIGITAL IN 3
of the MAP V2.0. Only
in case of
both
connections are setup and the switch for the interface mode on the back
panel of the VIP is set to
h-bit
(refer to owner's manual of VIP), it is possible to receive
and decode DVD-Audio data with the MAP.
Note:
Data on the Audionet HighBit interface will be recognized and decoded
automatically by the MAP. If the second data connection is missing the MAP will issue
the error message: '
HighBit Cable 2 Out of lock
'. Please check the correct
setup and connection of both cables from VIP to MAP.
External 8-Channel Analog Inputs:
Plug in analog multi channel sources (external decoder, DVD-Player with internal
decoder, SACD-Player etc.) into the 8-channel analog input 11 of the MAP.
Note:
The External 8-Channel Analog Input has no signal processing at all, only pure
analog volume control!
Analog Outputs:
The output of the front channels L/R 19 (Cinch and XLR) are marked
main line out
or
main right/main left
and are located in the lower left part of the back panel. All other
analog outputs 12 are located in the section
ANALOG OUTPUTS
in the upper right part
of the back panel. For Center and Subwoofer channel are two outputs available each
carrying the same signal.
Digital Outputs:
Select
DigiRec Select
in the setup menu, which digital input 2 to 5 10 is routed to the
digital outputs 8. Both formats (optical and coaxial) are always available. The digital
record select works independently, therefore you can use digital out for recording while
listening to a different source.
1
Make sure your VIP supports the HighBit DVD-Audio interface. Software upgrades are available for older models.
