34
-
Input for By-Pass
Use the rotary encoder on the front panel to select the input channel you
would like to use for the By-Pass Mode.
The display shows the selectable input channel with its input number (as printed
on the back panel) and its user-defined name. Acknowledge and save your selec-
tion by pressing the
Save
key.
Press the
Default
key to reset the By-Pass Mode to the factory default setting
'0 - No Input'. Confirm the change with the
Save
key afterwards.
Note
The display shows
0 - No Input
if no input channel is selected for the By-Pass
Mode (factory default).
If an input channel is selected for the use in By-Pass Mode, its icon on the
input selection screen reflects this setting by the additional text
By-Pass
on
the bottom of the channel icon:
Global Set t ings - By-Pass - Input
Hom e
Back
Display
Balance
Pow er
Serial
By-Pass
Net w ork
Reset
Info
Save
Input for By-Pass
5 - Line Input 5
DC Servo for By-Pass
Default
On
By-Pass
6
5
