06
07
Operation
Using the transmitter and the headphones
1. Turn on the audio source which the transmitter is connected to. The LED indicator on the
transmitter will light in orange when the transmitter receives the audio signal.
2. Turn on the headphones by pressing the power button for about 1 second. The LED
indicator on the headphones will light up in red. It changes to green when the audio
signal link between the transmitter and headphones is established.
3. Place the headphones on your head. To obtain the desired sound level, adjust the volume
control on the headphones.
4. If interference or poor signal reception occurs, the headphones will mute and the green
LED will change to red. The headphones will automatically search for another channel to
run. The LED indicator on the headphones will light up in green again when the re-link
between the transmitter and headphones is successful.
5. When the battery power of the headphones is too low, the LED indicator on the
headphones will blink in red. There will be beeping sound from the headphones every
minute. After two continuous beeping sounds, the headphones will automatically turn
Off.
6. The headphones can be used as regular wired headphones by connecting your audio
source to the headphones’ jack directly.
Headphones battery installation
1. To install or replace the rechargeable batteries, carefully pull out the headphones cushion
(Left) and take it off.
2. Insert the 2 pieces of AAA size rechargeable batteries (supplied in the package) into the
battery compartment of headphone cabinet (Left). Make sure the batteries are placed at
the right polarity.
3. Reinstall the cushion to the headphones after the batteries are inserted.
Transmitter
Rear View
RCA Cable
Music Player
DC 5V 550mA
Power Adaptor
Mains
Socket
