− Starting Up −
54
4
Starting Up
4.1
Safety notes
Caution:
It is essential to read the General Information at the beginning of this man-
ual before starting up.
4.2
Checking the package contents
The package contains:
a base station
a telephone connection cable
a handset
two standard batteries
a power adapter plug with cable
an operating manual
4.3
Connecting the base station
Position the base station within reach of the telephone line socket and a power outlet. Only
use the components supplied.
1. Insert the small plug on the power adapter plug cable in the corresponding socket
on the underside of the base station.
NOTE:
The plug cannot be connected incorrectly because the plug and socket are
designed in such a way to prevent reverse poling. The plugs must snap audibly into
the base station sockets.
2. Insert the small plug on the telephone connection cable in the corresponding socket
on the underside of the base station.
3. Feed both cables on the underside of the base station in the cable duct provided.
4. Plug the power adapter plug in a properly installed 230 Volt power outlet. The power
adapter plug from the base station must remain connected at all times.
5. Connect the telephone connection cable supplied in telephone socket F.
4.4
Inserting the standard batteries
In order to insert the rechargeable standard batteries in the handset, press on the top edge of
the battery compartment cover and slide it downwards. Only insert standard batteries. Pay
attention the correct polarity. Close the battery compartment cover.
+
−
−
+
