- T-NET/Private exchanges -
49
7
T-NET mode / Private exchanges
You can use the "R" signal button on your telephone on private exchanges and when using
DEUTSCHE TELEKOM's T-Net functions.
7.1
"R" Button on private exchanges
If you have connected your telephone to a private exchange, you can use all the facilities
such as call transfer, automatic recall, etc. The "R" signal button gives you access to these
facilities. The FLASH time "100ms" will be required on a private exchange (Adjustment, see
8.2.3). You can find out from the dealer from whom the equipment was purchased whether
your telephone will work on your private exchange without any problems.
7.2
"R" Button and the DEUTSCHE TELEKOM T-Net
Your AUDIOLINE telephone supports the most important DEUTSCHE TELEKOM added
value functions (e.g. brokering, call waiting, three-way conference, etc.). The T-Net works
using the "FLASH 300ms" setting. (Adjustment, see 8.2.3). Please contact DEUTSCHE
TELEKOM to gain access to T-Net functions.
7.3 Using
Pause
With private exchanges, it is necessary to dial a certain number (e.g. "9" or "0") in order to
obtain a dialling tone for an outside line on the extension. With some, older private
exchanges, it takes some time before the dialling tone can be heard. Especially for these
private exchanges, an automatic pause can be inserted after connecting to the outside line
so that you can dial directly without waiting for the dialling tone.
Entering a pause when dialling manually
Press the
button once for 3 seconds between the number for the outside line and the
actual telephone number. The symbol
P
will appear in the display. After connecting to an
outside line your telephone will wait for 3 seconds before dialling the actual telephone
number.
The pause can also be saved with numbers in the phone book.
