P. 5
- AUDIOLAB Live AN Split
English version
3. CONTROL ELEMENTS
be sent to the main output bus,combined
with the main input signal on condition
that the MAIN LINK is activated, you can get
themixed signal output from the MAIN OUT
sockets. Further, also for the MIXER mode,
you can route the mono channel input signal
to the mono channel output directly.
7.
LEVEL control for each channel
This knob
is used to adjust the level of each mono
channel, and its adjustable range goes from
- to + 10dB, definitely,In SPLITTER mode, this
control is used to determine the output level
of each individual mono channel. While in
MIXER mode, this control can be used to de
-
termine how much the mono channel input
signal is sent the main output bus and/or
each individual mono channel output.
8.
INPUT/OUTPUT LEVEL meter
This 6-dig-
it meter tells you the output level of each
mono channel, while the Clip LED lights up,
please turn down the level control, other
-
wise, this channel will be distorted.
9.
BALANCE/PAN control
Generally, the main
section uses the stereo input and output,
while, for each individual channel, mono ap
-
plication is configured. So, if the stereo main
signal is split into the mono channel output,
Front panel
1.
MAIN INPUT LEVEL control
This knob is used
to adjust the level of the main input signal,
and its adjustable range goes from - to + 10dB.
2.
INPUT LEVEL meter
This 6-digit meter tells
you the level of the main input signal. While
the Clip LED lights up, please turn down the
main input signal, otherwise, the system will
be distorted.
3.
MAIN LINK control
Use this switch to link the
MAIN IN with the MAIN OUT.
4.
MAIN OUT PUT LEVEL control
This knob is
used to adjust the level of the main output
signal, and its adjustable range goes from - to
+ 10dB.
5.
OUTPUT LEVEL meter
This 6-digit meter tells
you the level of the main output signal.While
the Clip LEDl ights up, please turn down the
main signal at either each input stage or the
-
main output stage, otherwise, the system will
be distorted.
6. SPLIT/MIX
Use this switch to select the specif
-
ic operational mode for each individual mono
channel. For
SPLITTER mode
, please let the
switch released, and the main input signal can
then be split into each mono channel output.
For
MIXER mode
, please engage this switch,
and now, the mono channel input signal will
