P. 3
- AUDIOLAB EQ-2231
English version
2. IMPORTANT SAFETY INSTRUCTIONS
CAUTION: Risk of electric shock do not
open.
WARNING: To reduce the risk of fire
or electric shock do not expose this
equipment to rain or moisture.
The symbols shown above are internationally
accepted symbols that warn of potential hazards
with electrical products. The lightning flash with
arruwpoint in an equilateral triangle means that
there are dangerous voltages present within the
unit. The exclamation paint in an equilateral tri-
angle indicates that it is necessary for the user to
refer to the owner s manual.
These symbols warn that there are no user ser-
viceable parts inside the unit. Do not open the
unit. Do not attempt to service the unit yourself.
Refer all servicing to qualified personnel. Opening
the chassis for any reason will void the manufac-
turers warranty. Do not get the unit wet. If liquid
is spilled on the unit, shut it off immediately and
take it to a dealer for service. Disconnect the unit
during storms to prevent damage.
Safety instructions
Notice for customers if your unit is equipped
with a power cord.
WARNING: This appliance must be earthed.
The cares in the mains lead are coloured in ac-
Physical
• Dimensions: 134x483x201 mm. / 5.25x19x7.9 in.
• Weight: 4.8 Kg. / 10.6 Lbs.
cordance with the fallowing code:
• GREEN and YELLOW - Earth
• BLUE - Neutral
• BROWN - Live
As colours of the cores in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
• The cure which is coloured green and yellow
must he connected to the terminal in the
plug marked with the letter E, or with the
earth symbol, or coloured pen, or green and
yellow. a The care which is coloured blue
must be connected to the terminal marked N
or coloured black.
• The core which is coloured brawn must
he connected to the terminal marked L or
coloured red.
This equipment may require the use of a differ
-
ent line cord, attachment plug, or both, depend-
ing on the available power source at installation.
If the attachment plug needs to be changed,
refer servicing to qualified service personnel
who should refer to the table below. The green/
yellow wire shall he conned- directly to the units
chassis.
