background image

P. 13

  - AUDIOLAB DQX-14400

6. MAINTENANCE

This amplifier is a high-quality product, and the 
internal circuit is complex, please contact with our 
technical support to verify the maintenance needs 
first if it is fault. The circuit of this unit is very com-
plex, only can be maintained by the professional 
technician which is trained fully When you send 
this amplifier to the manufacturer or authorized 
service center to repair, please fill out the "Maint-
en -ance Information Card which is in the back of 
this manual This card must be with the product 
to pack in the carton, or pack it in the packing list 
envelope and firmly affix it to the outside of the 
shipping carton. Do not send this card alone. Our 
company does not undertake any responsibility 
for the one which is not within the maintenance 
range but has already been sent to the manufac-
turer Before sending the amplifier to repair the 
product owner should be responsible for ensuring 
the unit whether is in maintenance range or not 
About the detail maintenance range, please refer 
to the "product warranty card" section. For more 
information, please contact us directly.

Packing directions

1.  Please fill out the attached "Maintenance In-

formation Card" in the back of the manual. 

2.  Do not transport the unit with any accesso-

ries, such as the wires, hardware and the man-
ual. The product's repair does not need these 
items, and these items we are not responsible 
for. 

3.  When transporting the products, it must be 

fully protected. We recommend that you send 
back to repair with the original packaging. 

4.  If you transport the unit with your own pack-

aging, the simple packaging at least meets the 
following requirements: 

a.  Use the double-layer carton which has passed 

the 275 PSI (PSI: pressure units, 1kg/cm2 

approximately 14.5 PSI) burst test, and leave 
8cm space to fill the solid foam polystyrene 
at the six surfaces. 

b.  Use enough sealing tape to seal the carton. 
c.  Do not use thin carton. The damage due to 

the poor packaging will not be able to enjoy 
the warranty.

Non-warranty repair fee 

As to the repair is not within the warranty range, 
we will confirm with you to agree the mainte-
nance after we detecting and will start to repair 
after receiving the payment. If you do not agree 
to repair, please contact our service center ASAP 
to get back the amplifier. We have no obligation 
to keep your unit, if you do not get back your 
unit after 30 days, it will be became our proper-
ty. If you have any questions, please contact us.

Warranty

 

Our company assures you whether you are the 
original purchaser or the subsequent owner of 
the product, within three (3) years purchased 
from the date you buying, no matter what the 
reason is for any non-human factors or the 
irresistible force effects caused the failure of the 
new products, our company will provide warranty.

Warranty liability

For any defect, no matter for any fault reason 
(except for the excluding objects), we will reme-
dy by repair, replacement or refund. Unless you 
agree, or we can not provide the replacement 
service and can not solve the problem by repair 
or can not provide timely maintenance, or else 
we will not choose to refund. If we choose to 
refund, you must return the defective product 
or the product which can not work normally to 

English version

Summary of Contents for DQX-14400



































Reviews: