background image

one  wider  than  the  other.  A  grounding  plug  has  two 
blades and a third grounding prong. The wide blade or 
the third prong is provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched 
particularly at the plugs, convenience receptacles, and at 
the point where they exit from the apparatus.

Use only with the cart, stand, tripod, bracket, 
or  table  specified  by  the  manufacturer,  or 
sold with the apparatus. When a cart or rack 
is used, use caution when moving the cart/
apparatus combination to avoid injury from 
tip-over. 

Unplug  this  apparatus  during  lightning  storms  or  when 
unused for long periods of time.

Refer all servicing to qualified service personnel. Servicing 
is required when the apparatus has been damaged in any 
way, such as power supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus, 
the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.

CAUTION:

  These  servicing  instructions  are  for  use  by 

qualified  service  personnel  only.  To  reduce  the  risk  of 
electric shock, do not perform any servicing other than 
that contained in the operating instructions unless you are 
qualified to do so.

Do  not  install  this  equipment  in  a  confined  or  built-in 
space such as a bookcase or similar unit, and keep well 
ventilated in open space. The ventilation should not be 
impeded by covering the ventilation openings with items 
such as newspaper, table-cloths, curtains etc.

WARNING:

 Only use attachments/accessories specified or 

provided by the manufacturer (such as the exclusive supply 
adapter, battery etc).

WARNING: 

Please refer to the information on the exterior 

panel of the enclosure for electrical and safety information 
before installing or operating the apparatus.

WARNING:

  The  battery  (battery  or  batteries  or  battery 

pack)  shall  not  be  exposed  to  excessive  heat  such  as 
sunshine, fire or the like.

CAUTION: 

Danger of explosion if battery is incorrectly 

replaced. Replace only with the same or equivalent type. 

This  label  tells  you  that  the  unit 
contains  a  laser  component. 
Opening  the  unit  will  expose  the 
user  to  radiation  from  the  laser 
beam.

Mains Supply: 

The mains operating voltage of Audiolab 

8300 series units is shown on the rear panel. If this voltage 
does not match the mains voltage in your area, consult 
your Audiolab dealer about converting the unit.

The mains supply fuse on the rear panel is accessible when 
the IEC mains plug has been removed. In the rare event 
that it has broken, check for any obvious cause before 
replacing the fuse with one of the correct rating and type. 
The fuse values are:

220 – 240V (UK, China, etc.)   T1AL 250V Slow Blow

100 – 120V (USA, Japan, etc.)  T1.6AL 250V Slow Blow

1:  Important Safety Information

AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS 

OUVRIR WARNING: SHOCK HAZARD-DO NOT OPEN

This  lightning  flash  with  arrowhead  symbol  within  an 

equilateral  triangle  is  intended  to  alert  the  user  to  the 

presence of non-insulated “dangerous voltage” within the 

product’s enclosure that may be of sufficient magnitude to 

constitute a risk of electric shock.
Warning:  To  reduce  the  risk  of  electric  shock,  do  not 

remove cover (or back) as there are no user-serviceable 

parts inside. Refer servicing to qualified personnel.
The  exclamation  point  within  an  equilateral  triangle  is 

intended to alert the user to the presence of important 

operating and maintenance instructions in the literature 

accompanying the appliance.

IMPORTANT SAFETY INFORMATION

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do  not  block  any  ventilation  openings.  Install  in 

accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) 

that produce heat. 
Do  not  defeat  the  safety  purpose  of  the  polarized  or 

grounding-type plug. A polarized plug has two blades with 

Page 1

Summary of Contents for 8300CD

















Reviews: