Audiolab 8300CD, User Instructions

Page: 10 / 16

Page 9
7: The Menu
The menu enables you to customize the unit and optimize the interface with other equipment in your system.
8300CD has 14 different menu pages. Press MENU key to enter menu mode, and then press or to turn to different menu pages, press to enter any menu page, press or again to select different
setting, press again to confirm chosen setting and exit the menu mode. No operation for 5 seconds will also exit menu mode. The Setting will not take effect if is not pressed.
The Menu Tree
The chart shows the menu options, Main menu item are at the top. The next level shows the default settings.
Digital Filter
Optimal Trandient XD
Digital Filter
Optimal Transient DD
Digital Filter
Sharp Rolloff
Digital Filter
Minimum Phase
Digital Filter
Optimal Spectrum
Digital Filter
Optimal Transient
DSD Bandwidth
Normal
DSD Bandwidth
50k
DSD Bandwidth
60k
DSD Bandwidth
70k
Track & Time
Show If Available
Track & Time
Do Not Show
Sampling Rate
Nominal Frequency
Sampling Rate
Actual Frequency
Jitter Rejection
Automatic
Jitter Rejection
Low Bandwidth
Jitter Rejection
Medium Bandwidth
Jitter Rejection
High Bandwidth
Default Input
Recall Last Input
Default Input
CD
Default Input
COAX1
Default Input
COAX2
Default Input
OPT1
Default Input
OPT2
Default Input
USB
Default Input
AES3
Trigger A Control
Enable
Trigger A Control
Disable
Trigger B Control
Enable
Trigger B Control
Disable
Trigger B Control
Follow Trigger A
Balance
0.0dB L R
Balance
3.5dB R
Balance
4.5dB L
Output Level
Adjustable
Output Level
0dBr (2.2 Vrms)
Output Level
+3dBr (3.1 Vrms)
Factory Reset
No
Factory Reset
Reset
Software Version
Ver:0.0013
Auto Standby
Never
Auto Standby
20 Minutes
Digital Filter
Slow Rolloff
Display Brightness
High
Display Brightness
Low
Display Brightness
Off