6
Complimentary Features
Features continued
• DHCP: An IP address is obtained
via DHCP by default. If a DHCP
server is not found on the network,
The Director D2800 will default to
192 .168 .0 .249 .
• Numbering: In the device discovery /
UPnP window, if you are using mul-
tiple Director amplifiers, you will find
that each Director is numbered in the
sequence they were added onto the
network.
• Groups: Grouping has been enabled
for quick control of zones through
Telnet commands. Up to 4 groups can
be defined for control over Standby
and Source Selection.
• Import/Export: Exporting and Im-
porting of the amplifier’s settings
– including EQ settings – has been
enabled. Now you can configure your
EQ settings as a template and apply
these to each Director D2800 ampli-
fier in your system. A little refining of
those settings for each amp and you
will be in and out in no time.
• 8 channels of AudioControl
amplification
• Any zone can play a local or bus source
• Efficient power amplifiers and power
supplies
• Power consumption is less than 2 Watts
in standby
• Rack mountable 1U form factor
• Removable rack ears
• Light weight
• Stackable with other Director or Archi-
tect Models
• Signal sense independent for each zone
• Input assignment independent for each
zone
• Super wonderful signal processing
allows for a wide variety of EQ options
and adjustments
• 12V Master trigger usable with contact
closure or 12V external source
• 12V trigger in for each zone
• Bus A Coaxial and Optical digital inputs
assignable to any zone
• Analog and digital signal-present LEDs
