10
Rear Panel
Rear Panel Features
1 . Light Bar Brilliance setting – toggle
this button to set the desired
luminescence of that nebulistic front
panel light bar to bright, dim, or off.
2 . Inputs – The Savoy G4 features both
Balanced XLR and unbalanced RCA
inputs to connect to your preamplifier
outputs. Any standard line level audio
signal can be connected here. The
STATUS LED will light blue when the
channel is operating normally.
3 . RCA Thru* – These RCA jacks are
for looping your audio input signal
to another pair of inputs on another
device or section of the Savoy G4.
These line-level outputs are a hard-
wired copy of whatever is coming
in on the inputs. *While “Through”
here is spelled like it sounds, there
wasn’t enough room on the richly
dense rear panel. We sacrificed some
grammatical correctness to fit more
on the rear panel– we felt it was a
decent trade off.
4 . Level – This control provides for Gain
adjustment on the input signal. Use
this to calibrate optimal signal level
to drive the Savoy G4 to full output.
These adjustments are applied per
channel input, so for stereo signals,
best practice is to match the SPL
from the one output to the rest of the
channels on the Savoy G4. We have
detents there to make this easy. If
those don’t work for you can use an
measurement tool like our DM-RTA or
the SA-4100i to test and calibrate your
level settings for each output.
5. Stereo/Mono – These switches allow
the channel pair to be used in stereo,
or combined in mono. In mono,
channel 1 or 2 inputs are summed, so
just use one input. The same applies to
channels 3 and 4 in mono, just use one.
6
7
8
1 2 3 4 5
9 10 11
